Quality Plan

Men's 3-Layer Waterproof Shell Jacket · PO-AS-FW27-001 · Summit Technical Apparel (Vietnam) · specification v1

Back to AntFlow order

Product risks carried forward

Tests included

12/12

Estimated test cost

USD 2,160

Checkpoints

4/4

Product risks carried forward from AntConception

Each risk area cites the specification risk and the tests that control it.

Product Risk Plan

Linked specification risks: 7 recorded in AntConception.

Recommended laboratory and performance tests

AI-recommended from the approved specification. Include or exclude each one — the decision is the buyer's.

Recommended tests
Include	Test	Standard	Acceptance criteria	Level	Cost
Include Hydrostatic pressure	Hydrostatic pressurePerformance · Demonstration Textile Test Lab	ISO 811	At least 20,000 mm	mandatory	$180
Include Breathability / RET	Breathability / RETPerformance · Demonstration Textile Test Lab	ISO 11092	RET no more than 13	mandatory	$220
Include Spray rating	Spray ratingPerformance · Demonstration Textile Test Lab	AATCC 22	Rating 90 or above	recommended	$90
Include Seam waterproofness	Seam waterproofnessConstruction · Demonstration Textile Test Lab	ISO 811 (seam)	No leakage at 20,000 mm	mandatory	$200
Include Fabric-to-membrane adhesion	Fabric-to-membrane adhesionDurability · Demonstration Textile Test Lab	ISO 6133	No visible delamination at minimum peel strength	mandatory	$160
Include Delamination after laundering	Delamination after launderingDurability · Demonstration Textile Test Lab	ISO 6330 + visual assessment	No delamination after 20 wash cycles	mandatory	$240
Include Dimensional stability	Dimensional stabilityDurability · Demonstration Textile Test Lab	ISO 5077	Shrinkage within plus or minus 2 percent	mandatory	$120
Include Colorfastness to washing and rubbing	Colorfastness to washing and rubbingDurability · Demonstration Textile Test Lab	ISO 105-C06 / ISO 105-X12	Grade 4 or above	mandatory	$140
Include Abrasion resistance	Abrasion resistanceDurability · Demonstration Textile Test Lab	ISO 12947 (Martindale)	No visible wear at 20,000 cycles	recommended	$130
Include Zipper waterproofness	Zipper waterproofnessTrim · Demonstration Textile Test Lab	ISO 811 (zipper)	No leakage at 10,000 mm	mandatory	$150
Include Seam strength	Seam strengthConstruction · Demonstration Textile Test Lab	ISO 13935-2	At or above 180 N	mandatory	$110
Include Restricted-substance compliance	Restricted-substance complianceCompliance · Demonstration Compliance Test Lab	ApparelMind restricted-substance list (demonstration)	No detected substance above threshold	mandatory	$420

Inline, end-line and final inspection checkpoints

InlineInline seam-tape verification
100% of critical taped seams during bulk sewing
Summit Technical Apparel — QA line lead (simulated) · planned 2027-03-13
InlineInline workmanship spot-check
Hood and articulated-sleeve construction, hourly sampling
Summit Technical Apparel — QA line lead (simulated) · planned 2027-03-16
End-lineEnd-line measurement audit
Graded critical-to-quality measurements across the size run
ApparelMind Vietnam expert (simulated) · planned 2027-03-24
FinalFinal AQL inspection with camera vision
ISO 2859-1 General Level II sampling plus 100% critical-measurement check
ApparelMind Vietnam expert (simulated) · planned 2027-04-05

AQL configuration and defect classification

General Level II (ISO 2859-1) · lot 3,000 · sample 125

Critical — acceptZero-accept: any critical defect fails the lot.Major — accept (AQL 2.5)Defects that affect performance or fit.Minor — accept (AQL 4)Cosmetic or appearance defects.

Approval is recorded in this demonstration session only — no laboratory, factory or inspection service is booked.